风筝 陈升:关于catalyst 3560 的初使化
来源:百度文库 编辑:中科新闻网 时间:2024/10/01 12:26:44
为什么我的3560XL交换机初使化后是以下的状态,有谁明白帮我讲一讲,怎么初使化才能正常使用。谢谢。以下的超级终端里的信息。
Base ethernet MAC Address: 00:17:0e:12:4b:80
Xmodem file system is available.
The password-recovery mechanism is enabled.
The system has been interrupted prior to initializing the
flash filesystem. The following commands will initialize
the flash filesystem, and finish loading the operating
system software:
flash_init
load_helper
boot
switch:
switch: //从这里开云始就可打命令了,再下面是打HELP命令后出来的。
switch: help
? -- Present list of available commands
boot -- Load and boot an executable image
cat -- Concatenate (type) file(s)
copy -- Copy a file
delete -- Delete file(s)
dir -- List files in directories
flash_init -- Initialize flash filesystem(s)
format -- Format a filesystem
fsck -- Check filesystem consistency
help -- Present list of available commands
load_helper -- Load and initialize a helper image
memory -- Present memory heap utilization information
mkdir -- Create dir(s)
more -- Concatenate (display) file(s)
rename -- Rename a file
reset -- Reset the system
rmdir -- Delete empty dir(s)
set -- Set or display environment variables
set_bs -- Set attributes on a boot sector filesystem
set_param -- Set system parameters in flash
sleep -- Pause (sleep) for a specified number of seconds
-- MORE --
trap -- Cause a software breakpoint to occur
type -- Concatenate (type) file(s)
unset -- Unset one or more environment variables
version -- Display boot loader version
switch:
哪位高手能帮我一下。谢谢!
Base ethernet MAC Address: 00:17:0e:12:4b:80
Xmodem file system is available.
The password-recovery mechanism is enabled.
The system has been interrupted prior to initializing the
flash filesystem. The following commands will initialize
the flash filesystem, and finish loading the operating
system software:
flash_init
load_helper
boot
switch:
switch: //从这里开云始就可打命令了,再下面是打HELP命令后出来的。
switch: help
? -- Present list of available commands
boot -- Load and boot an executable image
cat -- Concatenate (type) file(s)
copy -- Copy a file
delete -- Delete file(s)
dir -- List files in directories
flash_init -- Initialize flash filesystem(s)
format -- Format a filesystem
fsck -- Check filesystem consistency
help -- Present list of available commands
load_helper -- Load and initialize a helper image
memory -- Present memory heap utilization information
mkdir -- Create dir(s)
more -- Concatenate (display) file(s)
rename -- Rename a file
reset -- Reset the system
rmdir -- Delete empty dir(s)
set -- Set or display environment variables
set_bs -- Set attributes on a boot sector filesystem
set_param -- Set system parameters in flash
sleep -- Pause (sleep) for a specified number of seconds
-- MORE --
trap -- Cause a software breakpoint to occur
type -- Concatenate (type) file(s)
unset -- Unset one or more environment variables
version -- Display boot loader version
switch:
哪位高手能帮我一下。谢谢!
关于catalyst 3560 的初使化
ATI的Catalyst Control Center驱动
ATI的Catalyst Control Center我不会用呀~~
谁能翻译下 ATI CATALYST软件的中文?
点右键的ati catalyst control center没反应是什么原因?
求ATI Catalyst Control Center的汉化补丁
Catalyst在电子专业方面的意思是?
ATI CATALYST有没有中文版的啊,到那里下载?
安装ATI新的带有CATALYST Control Center的驱动,会出现CATALYST Control Center无法启动的情况,怎么解决
catalyst 1900系列交换机,其中catalyst是什么意思?